Helio X25 was the fastest deca-core 20nm SoC from MediaTek with three cluster designs and this SoC ended up in quite a few prominent China higher end phones including a few Meizu devices. But it looks like customers wanted a bit faster camera, SoC and GPU performance for its late 2016 early 2017 phones, the ones that will launch before the Helio X30 comes to market.

Jeffrey Ju, Executive Vice President and Co-Chief Operating Officer at MediaTek said: “The MediaTek Helio platform fulfills the diverse needs of device makers. Based on the success of MediaTek Helio X20 and X25, we are introducing the upgraded MediaTek Helio X23 and X27. The new SoCs support premium dual camera photography and provide best in-class performance and power consumption,”

The Helio X25 has two Cortex A73 cores clocked at 2.5 GHz, four Cortex A53 clocked at 2.00 GHz and last four Cortex A53 clocked at 1.55GHz. The Mali GT880 graphics is clocked at 850 MHz.

The Helio X20 has two Cortex A73 cores clocked at 2.1 GHz, four Cortex A53 clocked at 1.85 GHz and last four Cortex A53 clocked at 1.4GHz. The Mali GT880 graphics is clocked at 780 MHz.

The newcomer, Helio X27, has two Cortex A73 cores clocked at 2.6 GHz, four Cortex A53 clocked at 2.00 GHz and the last four Cortex A53 clocked at 1.6 GHz. The Mali GT880 graphics is clocked at 875 MHz. The rest of the specification is identical to the Helio X25.

The Helio X23 has two Cortex A73 cores clocked at 2.3 GHz, four Cortex A53 clocked at 1.85 GHz and the last four Cortex A53 clocked at 1.4GHz. The Mali GT880 graphics is clocked at 780 MHz. As you can see, this is just a slightly faster version of Helio X20 and it sits just below Helio X25 with its specs.

Thanks to MediaTek-engineered advancements in the CPU/GPU heterogeneous computing scheduling algorithm, both products deliver more than a 20 percent overall processing improvement and significant increases in web browsing and application launching speeds. This definitely sounds promising but you should bear in mind that MediaTek had enough time to optimize these designs of the new and updated SoCs.

Phones based on the Helio X27 and X23 will be available soon.

Courtesy-Fud

However, Christopher Danely with Citigroup has bravely claimed that with its “Kaby Lake” family of processors, Intel remains a “step-function ahead of AMD Zen when Zen chips are released in Q416.”

He also doubts the benchmark stats that AMD presented to promote Zen’s capabilities relative to Intel’s microprocessors claiming that the AMD controlled benchmark compared an engineering sample of a Zen processor that has not been released yet against a three-month old Intel processor, with both chips clocked at 3.0 Ghz.

“We note the maximum speed for the Intel chip is 3.2 GHz. The result showed AMD completing the benchmark 2 per cent faster than Intel, implying higher CPU efficiency on a “clock for clock” basis. AMD kept both 8 core chips at the same clock speed of 3.0 Ghz, below the native clock speed of the Intel chip. The benchmark result showed the Zen Summit Ridge processor completing the Blender rendering benchmark in 48.07 seconds, 2 per cent ahead of Intel Broadwell-E chip’s time of 49.06 seconds. We note this is only one benchmark using a custom workload performed at an AMD event under controlled conditions, and therefore cannot be verified by third parties and does not represent expected results under all workloads, Danely said.

Instead he thinks that Chipzilla will benefit from its process technology lead while AMD’s manufacturing partner, Global Foundries, which has a “spotty track record.”

“After several of delays and eventually failing to develop 20nm and 14nm on its own, GlobalFoundries entered into a partnership agreement with Samsung in April 2014 to adopt Samsung’s 14nm FinFET process. Despite using the same tools, recipes, and materials as Samsung’s 14nm process, products built on GlobalFoundries’ 14nm did not appear until earlier this year, roughly a year after Samsung released its Exynos 7420 SoC built on its 14nm process,” Danely pointed out.

Since the partnership agreement with Samsung does not include 10nm or lower nodes, we think the technology gap between AMD and Intel will widen again once Intel migrates to 10nm next year.

Meanwhile Intel released its new Kaby Lake chips on an improved 14+nm process this month, featuring a 15 per cent performance improvement over its Skylake chips. Kaby Lake chips deliver up to 12 per cent faster productivity performance and 19 per cent faster web performance over comparable Skylake chips

“We expect independent benchmarks to show Intel’ performance is a step function ahead of AMD Zen when Zen chips are released in 4Q16,” he said.

Below you will find lots of rantings from Intel and AMD fanboys and we expect the language to be colourful. Those of a sensitive disposition might want to look away now.

Courtesy-Fud

Company co-CEO Mark Liu said that while the fourth quarter could be a bit rough as customers start their inventory adjustments, TSMC’s sales for the quarter will still outperform those for the third quarter.

Talking to Digitimes Lui said that smartphone demand was affected negatively by macroeconomic factors in the first half of 2016. But apparently smartphone chip clients are ordering again in the second half of the year.

TSMC previously estimated its 2016 revenues would grow 5-10 per cent. The foundry expects to meet the high end of the growth guidance, Liu said. In his speech at the CEO Forum of SEMICON Taiwan 2016. Liu claimed that the foundry industry growth is being driven by the markets for smartphones, HPC, automotive and IoT.

Apps like Pokemon G will require more silicon chips used in mobile devices that will be another growth driver in the future, Liu said.

Courtesy-Fud

According to the company the improved management tools address both host (server) managment and virtual client monitoring. Nvidia says that with the new Grid software, admins will be able to get information about the number of virtual graphics instances in use and the number they can potentially create.

They can also see usage information for the stream processors on board each card, the percentage of the card’s frame buffer that’s in use, and the load on each card’s dedicated video encode and decode hardware.

Each guest vGPU instance will tell admins information on encoder and decoder usage, frame buffer occupancy, and the vGPU use. Nvidia adds that it all takes the guess work out of vGPU provisioning and the data it’s exposing about vGPU usage will let system administrators tailor their virtual user profiles better.

All this means that it might stop the admins giving too much processing power to accounts when it is needed for the graphics team. Nvidia thinks those operational improvements will also help lower costs. The August 2016 Grid software update should be available immediately.

Courtesy-Fud

Samsung’s next generation Exynos’ name is very uninspired. You don’t call your much better chip just the Exynos 8895, but that might not be the final name.

The Korean giant went from Exynos 7420 for Galaxy S5 and first 14nm for Android followed a year after with Exynos 8890 still 14nm but witha  custom Exynos M1 “Mongoose” plus Cortex-A53eight core combination.

The new SoC is rumored to come with a 4GHz clock. The same leak suggests that the Snapdragon 830 can reach 3.6 GHz which would be quite an increase from the 2.15Ghz that the company gets with the Snapdragon 820. Samsung’s Exynos 8890 stops at 2.6GHz with one or two cores running while it drops to 2.3 GHz when three of four cores from the main cluster run. Calls us sceptics for this 4GHz number as it sounds like quite a leap from the previous generation.

Let us remind ourselves that the clock speed is quite irrelevant as it doesn’t mean anything, and is almost as irrelevant as an Antutu score. It tells you the maximal clock of a SoC but you really want to know the performance per watt or how much TFlops you can expect in the best case. A clock speed without knowing the architecture is insufficient to make any analysis. We’ve seen in the past that 4GHz processors were slower than 2.5GHz processors.

The fact that Samsung continued to use Snapdragon 820 for its latest greatest Galaxy Note 7 means that the company still needs Qualcomm and we don’t think this is going to change anytime soon. Qualcomm traditionally has a better quality modem tailored well for USA, China, Japan and even the complex Europe or the rest of the world.

Courtesy-Fud

According to the slides published by Computerbase.de, both GPUs are based on AMD’s 4th generation Graphics Core Next (GCN 4.0) GPU architecture, offer 2.8 perf/watt improvement compared to the previous generation, have 4K encode and decode capabilities as well as bring DisplayPort 1.3/1.4 and HDR support.

Powering three different graphics cards, these two GPUs will cover different market segments, so the Polaris 10, codename Ellesmere, will be powering both the Radeon RX 480, meant for affordable VR and 1440p gaming as well as the recently unveiled RX 470, meant to cover the 1080p gaming segment. The Polaris 10 packs 36 Compute Units (CUs) so it should end up with 2304 Stream Processors. Both the RX 480 and RX 470 should be coming with 4GB or 8GB of GDDR5 memory, paired up with a 256-bit memory interface. The Ellesmere GPU offers over 5 TFLOPs of compute performance and should peak at 150W.

The Radeon RX 470 should be based on Ellesmere Pro GPU and will probably end up with both lower clocks as well as less Stream Processors and according to our sources close to the company, should launch with a US $179 price tag, while the RX 480 should launch on 29th of June with a US $199 price tag for a reference 4GB version. Most AIB partners will come up with a custom 8GB graphics cards which should probably launch at US $279+.

The Polaris 11 GPU, codename Baffin, will have 16 CUs and should end up with 1024 Stream Processors. The recently unveiled Radeon RX 460 based on this GPU should come with 4GB of GDDR5 memory paired up with a 128-bit memory interface. The Radeon RX 460 targets casual and MOBA gamers and should provide decent competition to the Geforce GTX 950 as both have a TDP of below 75W and do not need additional PCIe power connectors.

According to earlier leaked benchmarks, AMD’s Polaris architecture packs quite a punch considering both its price and TDP so AMD just might have a chance to get a much needed rebound in the market share.

Courtesy-Fud

The Micron 1100 SSD is a more mainstream oriented SSD that will be based on Marvell’s 88SS1074 controller and Micron’s 384Gb 32-layer TLC NAND. Using a SATA 6Gbps interface and available in M.2 and 2.5-inch form-factors, the Micron 1100 should replace Micron’s mainstream M600 series, based on 16nm MLC NAND.

The Micron 1100 SSD will be available in 256GB, 512GB, 1TB and 2TB capacities. It will offer sequential performance of up to 530MB/s for read and up to 500MB/s for write with random 4K performance of up to 92K for read and up to 83K IOPS for write. With such performance, it is obvious that the Micron 1100 series will target mainstream market and be a budget SSD.

The Micron 2100 is an M.2 PCIe NVMe SSD that is actually Micron’s first client oriented PCIe SSD and also the first PCIe SSD based on 3D NAND. Unfortuantely, Micron did not finalize the precise specifications so we still do not have precise performance numbers but it will be available in capacities reaching 1TB.

The Micron 1100 is expected to hit mass production in July so we should expect some of the first drives by the end of the next month. The Micron 2100 will be coming by the end of summer.

Courtesy-Fud

The new test chip contains ARM’s yet-to-be-announced “Artemis” CPU core which is named after a goddess who will turn you into deer and tear you apart with wild dogs if you ever see her. [The NDA must have been pretty tough on this chip.ed]

In fact things have been ticking along on this project for ages. ARM discloses that tapeout actually took place back in December last year and is expecting silicon to come back from the foundry in the following weeks.

ARM actually implemented a full four-core Artemis cluster on the test chip which should show vendors what is possible for their production designs. The test chip has a current generation Mali GPU implementation with 1 shader core to show vendors what they will get when they use ARM’s POP IP in conjunction with its GPU IP. There is also a range of other IP blocks and I/O interfaces that are used to validation of the new manufacturing process.

TSMC’s 10FF manufacturing process is supposed to increase density with scaling’s of up to 2.1x compared to the previous 16nm manufacturing node. It also brings about 11-12 per cent higher performance at each process’ respective nominal voltage, or a 30 per cent reduction in power.

ARM siad that comparing a current Cortex A72 design on 16FF+ and an Artemis core on 10FF on the new CPU and process can halve the dynamic power consumption. Currently clock frequencies on the new design are still behind the older more mature process and IP, but ARM expects this to improve as it optimizes its POP and the process stabilizes.

Courtesy-Fud

A recent Chinese-language Economic Daily News report claims that Mediatek wants the spun off business to drive VR sales. It all sounds pretty good but MediaTek have sort of denied the report.

Well we say sort of denied it. What it has told the Taiwan Stock Exchange  that it was not the report’s source, which is not quite the same thing.The spin off could go ahead, but MediaTek is denying that it told the EDN its cunning plans. But then again the EDN did not name its source either. Without a denial from the company we are none the wiser.

MediaTek’s VR unit was set up between end-2015 and early-2016 to focus on the development of the company’s VR solutions for handsets, the EDN thought.

Digitimes’ deep throats claimed TSMC is expected to achieve certification on its 10nm process in the fourth quarter of 2016, and deliver product samples to the customer for validation in the first quarter of 2017.

This means that TSMC could begin small-volume production for Apple’s A11 chips as early as the second quarter of 2017 and building the chips will likely start to generate revenues at TSMC in the third quarter. The A11-series processor will power the iPhone models slated for launch in the second half of 2017.

TSMC is expected to get two-thirds of the overall A11 chip orders from Apple.

The company is officially refusing to comment on Digitimes’ story, but it does fit into what we have already been told about Jobs’ Mob’s plans for next year.