AMD Finally Confirms Polaris Specs
In an official slides that have leaked, AMD has confirmed most of the specifications for both the Polaris 10 and the Polaris 11 GPUs which will power the upcoming Radeon RX 480, RX 470 and RX 460 graphics cards.
According to the slides published by Computerbase.de, both GPUs are based on AMD’s 4th generation Graphics Core Next (GCN 4.0) GPU architecture, offer 2.8 perf/watt improvement compared to the previous generation, have 4K encode and decode capabilities as well as bring DisplayPort 1.3/1.4 and HDR support.
Powering three different graphics cards, these two GPUs will cover different market segments, so the Polaris 10, codename Ellesmere, will be powering both the Radeon RX 480, meant for affordable VR and 1440p gaming as well as the recently unveiled RX 470, meant to cover the 1080p gaming segment. The Polaris 10 packs 36 Compute Units (CUs) so it should end up with 2304 Stream Processors. Both the RX 480 and RX 470 should be coming with 4GB or 8GB of GDDR5 memory, paired up with a 256-bit memory interface. The Ellesmere GPU offers over 5 TFLOPs of compute performance and should peak at 150W.
The Radeon RX 470 should be based on Ellesmere Pro GPU and will probably end up with both lower clocks as well as less Stream Processors and according to our sources close to the company, should launch with a US $179 price tag, while the RX 480 should launch on 29th of June with a US $199 price tag for a reference 4GB version. Most AIB partners will come up with a custom 8GB graphics cards which should probably launch at US $279+.
The Polaris 11 GPU, codename Baffin, will have 16 CUs and should end up with 1024 Stream Processors. The recently unveiled Radeon RX 460 based on this GPU should come with 4GB of GDDR5 memory paired up with a 128-bit memory interface. The Radeon RX 460 targets casual and MOBA gamers and should provide decent competition to the Geforce GTX 950 as both have a TDP of below 75W and do not need additional PCIe power connectors.
According to earlier leaked benchmarks, AMD’s Polaris architecture packs quite a punch considering both its price and TDP so AMD just might have a chance to get a much needed rebound in the market share.
Courtesy-Fud
Is AMD Outpacing nVidia
MKM analyst Ian Ing claims that AMD’s recent gaming refresh was better done than Nvidia’s.
Writing in a research report, Ing said that both GPU suppliers continue to benefit from strong core gaming plus emerging applications for new GPU processing.
However, AMD’s transition to the RX series from the R9 this month is proving smoother than Nvidia’s switch to Pascal architecture from Maxwell.
Nvidia is doing well from new GPU applications such as virtual reality and autonomous driving.
He said that pricing was holding despite a steady availability of SKUs from board manufacturers. Ing wrote that he expected a steeper ramp of RX availability compared to last year’s R9 launch, as the new architecture is lower-risk, given that HBM memory was implemented last year.
Ing upped his price target on Advanced Micro Devices stock to 5 from 4, and on Nvidia stock to 52 from 43. On the stock market today, AMD stock rose 0.9 per cent to 4.51. Nvidia climbed 0.2 per cent to 46.33.
Nvidia unveiled its new GeForce GTX 1080, using the Pascal architecture, on 27 May and while Maxwell inventory was running out, Nvidia customers were experiencing Pascal shortages.
“We would grow concerned if the present availability pattern persists in the coming weeks, which would imply supply issues/shortages,” Ing said.
Courtesy-Fud
AMD Goes Polaris
AMD has shown off its upcoming next-generation Polaris GPU architecture at CES 2016 in Las Vegas.
Based on the firm’s fourth generation Graphics Core Next (GCN) architecture and built using a 14nm FinFET fabrication process, the upcoming architecture is a big jump from the current 28nm process.
AMD said that it expects shipments of Polaris GPUs to begin in mid-2016, offering improvements such as HDR monitor support and better performance-per-watt.
The much smaller 14nm FinFET process means that Polaris will deliver “a remarkable generational jump in power efficiency”, according to AMD, offering fluid frame rates in graphics, gaming, virtual reality and multimedia applications running on small form-factor thin and light computer designs.
“Our new Polaris architecture showcases significant advances in performance, power efficiency and features,” said AMD president and CEO Lisa Su. “2016 will be a very exciting year for Radeon fans driven by our Polaris architecture, Radeon Software Crimson Edition and a host of other innovations in the pipeline from our Radeon Technologies Group.”
The Polaris architecture features AMD’s fourth-generation GCN architecture, a next-generation display engine with support for HDMI 2.0a and DisplayPort 1.3, and next-generation multimedia features including 4K h.265 encoding and decoding.
GCN enables gamers to experience high-performance video games with Mantle, a tool for alleviating CPU bottlenecks such as API overhead and inefficient multi-threading. Mantle, which is basically AMD’s answer to Microsoft’s Direct X, enables improvements in graphics processing performance. In the past, AMD has claimed that Kaveri teamed with Mantle to enable it to offer built-in Radeon dual graphics to provide performance boosts ranging from 49 percent to 108 percent.
The new GPUs are being sampled to OEMs at the moment and we can expect them to appear in products by mid-2016, AMD said. Once they are in the market, we can expect to see much thinner form factors in devices thanks to the much smaller 14nm chip process.
Courtesy-TheInq