Helio X25 was the fastest deca-core 20nm SoC from MediaTek with three cluster designs and this SoC ended up in quite a few prominent China higher end phones including a few Meizu devices. But it looks like customers wanted a bit faster camera, SoC and GPU performance for its late 2016 early 2017 phones, the ones that will launch before the Helio X30 comes to market.

Jeffrey Ju, Executive Vice President and Co-Chief Operating Officer at MediaTek said: “The MediaTek Helio platform fulfills the diverse needs of device makers. Based on the success of MediaTek Helio X20 and X25, we are introducing the upgraded MediaTek Helio X23 and X27. The new SoCs support premium dual camera photography and provide best in-class performance and power consumption,”

The Helio X25 has two Cortex A73 cores clocked at 2.5 GHz, four Cortex A53 clocked at 2.00 GHz and last four Cortex A53 clocked at 1.55GHz. The Mali GT880 graphics is clocked at 850 MHz.

The Helio X20 has two Cortex A73 cores clocked at 2.1 GHz, four Cortex A53 clocked at 1.85 GHz and last four Cortex A53 clocked at 1.4GHz. The Mali GT880 graphics is clocked at 780 MHz.

The newcomer, Helio X27, has two Cortex A73 cores clocked at 2.6 GHz, four Cortex A53 clocked at 2.00 GHz and the last four Cortex A53 clocked at 1.6 GHz. The Mali GT880 graphics is clocked at 875 MHz. The rest of the specification is identical to the Helio X25.

The Helio X23 has two Cortex A73 cores clocked at 2.3 GHz, four Cortex A53 clocked at 1.85 GHz and the last four Cortex A53 clocked at 1.4GHz. The Mali GT880 graphics is clocked at 780 MHz. As you can see, this is just a slightly faster version of Helio X20 and it sits just below Helio X25 with its specs.

Thanks to MediaTek-engineered advancements in the CPU/GPU heterogeneous computing scheduling algorithm, both products deliver more than a 20 percent overall processing improvement and significant increases in web browsing and application launching speeds. This definitely sounds promising but you should bear in mind that MediaTek had enough time to optimize these designs of the new and updated SoCs.

Phones based on the Helio X27 and X23 will be available soon.

Courtesy-Fud

The chip maker has raised its revenue guidance for the third quarter to $15.6 billion, plus or minus $300 million, an improvement from $14.9 million, plus or minus $500 million.

That’s due to PC makers replenishing laptop and desktop inventory, which means Intel is shipping out more chips. It’s likely in anticipation of the holiday season, when PC shipments rocket.

“The company is also seeing some signs of improving PC demand,” Intel said in a statement.

In the second quarter of the year, PC makers slowed down chip orders and were clearing out existing stock of laptops and desktops. PC shipments declined by 4.5 percent during that period, according to IDC.

Shipments of gaming PCs, 2-in-1s and Chromebooks are driving PC shipments. Microsoft’s free upgrade offer to Windows 10 has also ended, which means users are more likely to buy new PCs to get Windows 10.

Meanwhile, new laptops with Intel’s Kaby Lake chips are now available. All the top PC makers have announced new 2-in-1s and laptops with Intel’s new chips. New Kaby Lake chips for gaming PCs will be announced in January.

Intel also has started shipping Pentium and Celeron chips, both aimed at low-cost laptops, based on the same architecture and code-named Apollo Lake. Many Chromebooks are based on Apollo Lake chips.

Courtesy- http://www.thegurureview.net/computing-category/pc-market-showing-signs-of-life.html

However, Christopher Danely with Citigroup has bravely claimed that with its “Kaby Lake” family of processors, Intel remains a “step-function ahead of AMD Zen when Zen chips are released in Q416.”

He also doubts the benchmark stats that AMD presented to promote Zen’s capabilities relative to Intel’s microprocessors claiming that the AMD controlled benchmark compared an engineering sample of a Zen processor that has not been released yet against a three-month old Intel processor, with both chips clocked at 3.0 Ghz.

“We note the maximum speed for the Intel chip is 3.2 GHz. The result showed AMD completing the benchmark 2 per cent faster than Intel, implying higher CPU efficiency on a “clock for clock” basis. AMD kept both 8 core chips at the same clock speed of 3.0 Ghz, below the native clock speed of the Intel chip. The benchmark result showed the Zen Summit Ridge processor completing the Blender rendering benchmark in 48.07 seconds, 2 per cent ahead of Intel Broadwell-E chip’s time of 49.06 seconds. We note this is only one benchmark using a custom workload performed at an AMD event under controlled conditions, and therefore cannot be verified by third parties and does not represent expected results under all workloads, Danely said.

Instead he thinks that Chipzilla will benefit from its process technology lead while AMD’s manufacturing partner, Global Foundries, which has a “spotty track record.”

“After several of delays and eventually failing to develop 20nm and 14nm on its own, GlobalFoundries entered into a partnership agreement with Samsung in April 2014 to adopt Samsung’s 14nm FinFET process. Despite using the same tools, recipes, and materials as Samsung’s 14nm process, products built on GlobalFoundries’ 14nm did not appear until earlier this year, roughly a year after Samsung released its Exynos 7420 SoC built on its 14nm process,” Danely pointed out.

Since the partnership agreement with Samsung does not include 10nm or lower nodes, we think the technology gap between AMD and Intel will widen again once Intel migrates to 10nm next year.

Meanwhile Intel released its new Kaby Lake chips on an improved 14+nm process this month, featuring a 15 per cent performance improvement over its Skylake chips. Kaby Lake chips deliver up to 12 per cent faster productivity performance and 19 per cent faster web performance over comparable Skylake chips

“We expect independent benchmarks to show Intel’ performance is a step function ahead of AMD Zen when Zen chips are released in 4Q16,” he said.

Below you will find lots of rantings from Intel and AMD fanboys and we expect the language to be colourful. Those of a sensitive disposition might want to look away now.

Courtesy-Fud

Company co-CEO Mark Liu said that while the fourth quarter could be a bit rough as customers start their inventory adjustments, TSMC’s sales for the quarter will still outperform those for the third quarter.

Talking to Digitimes Lui said that smartphone demand was affected negatively by macroeconomic factors in the first half of 2016. But apparently smartphone chip clients are ordering again in the second half of the year.

TSMC previously estimated its 2016 revenues would grow 5-10 per cent. The foundry expects to meet the high end of the growth guidance, Liu said. In his speech at the CEO Forum of SEMICON Taiwan 2016. Liu claimed that the foundry industry growth is being driven by the markets for smartphones, HPC, automotive and IoT.

Apps like Pokemon G will require more silicon chips used in mobile devices that will be another growth driver in the future, Liu said.

Courtesy-Fud

According to the company the improved management tools address both host (server) managment and virtual client monitoring. Nvidia says that with the new Grid software, admins will be able to get information about the number of virtual graphics instances in use and the number they can potentially create.

They can also see usage information for the stream processors on board each card, the percentage of the card’s frame buffer that’s in use, and the load on each card’s dedicated video encode and decode hardware.

Each guest vGPU instance will tell admins information on encoder and decoder usage, frame buffer occupancy, and the vGPU use. Nvidia adds that it all takes the guess work out of vGPU provisioning and the data it’s exposing about vGPU usage will let system administrators tailor their virtual user profiles better.

All this means that it might stop the admins giving too much processing power to accounts when it is needed for the graphics team. Nvidia thinks those operational improvements will also help lower costs. The August 2016 Grid software update should be available immediately.

Courtesy-Fud

A recent Chinese-language Economic Daily News report claims that Mediatek wants the spun off business to drive VR sales. It all sounds pretty good but MediaTek have sort of denied the report.

Well we say sort of denied it. What it has told the Taiwan Stock Exchange  that it was not the report’s source, which is not quite the same thing.The spin off could go ahead, but MediaTek is denying that it told the EDN its cunning plans. But then again the EDN did not name its source either. Without a denial from the company we are none the wiser.

MediaTek’s VR unit was set up between end-2015 and early-2016 to focus on the development of the company’s VR solutions for handsets, the EDN thought.

Digitimes’ deep throats claimed TSMC is expected to achieve certification on its 10nm process in the fourth quarter of 2016, and deliver product samples to the customer for validation in the first quarter of 2017.

This means that TSMC could begin small-volume production for Apple’s A11 chips as early as the second quarter of 2017 and building the chips will likely start to generate revenues at TSMC in the third quarter. The A11-series processor will power the iPhone models slated for launch in the second half of 2017.

TSMC is expected to get two-thirds of the overall A11 chip orders from Apple.

The company is officially refusing to comment on Digitimes’ story, but it does fit into what we have already been told about Jobs’ Mob’s plans for next year.

For TSMC, Q1 2016 was marked by a reduction of demand for high-end smartphones, while smartphone demand in China and emerging markets had upward momentum. Beginning Q2 2016 and onward, the company expect to get back onto a growth trajectory and is projected to hit a 5 to 10 percent growth rate in 2016.

“Our 10-nanometer technology development is on track,” said company president and co-CEO Mark Liu during the company’s Q4 2015 earnings call. “We are currently in intensive yield learning mode in our technology development. Our 256-megabit SRAM is yielding well. We expect to complete process and product qualification and begin customer product tape-outs this quarter.”

“Our 7-nanometer technology development progress is on schedule as well. TSMC’s 7 nanometer technology development leverage our 10-nanometer development very effectively. At the same time, TSMC’s 7-nanometer offers a substantial density improvement, performance improvement and power reduction from 10-nanometer.

These two technologies, 10-nanometer and 7-nanometer, will cover a very wide range of applications, including application processors for smartphone, high-end networking, advanced graphics, field-programmable gate arrays, game consoles, wearables and other consumer products.”

In Q1 2016, TSMC reached a gross margin of 44.9 percent, an operating margin of 34.6 percent and a net profit margin of 31.8 percent respectively. Going forward into Q2 2016, the company is expecting revenue between ~$6.65 billion and ~$6.74 billion USD, gross margins between 49 and 51 percent, and operating profit margins between 38.5 and 40.5 percent, respectively.

Chips used for communications and industrial uses represented over 80 percent of TSMC’s revenue in FY 2015. The company was also able to improve its margins by increasing 16-nanometer production, and like many other semiconductor companies, is preparing for an expected upswing sometime in 2017.

In February, a 6.4-magnitude earthquake struck southern Taiwan where TSMC’s 12-inch Fab 14 is located, a current site of 16-nanometer production. The company expected to have a manufacturing impact above 1 percent in the region with a slight reduction in wafer shipments for the quarter.

“Although the February 6 earthquake caused some delay in wafer shipments in the first quarter, we saw business upside resulting from demand increases in mid- and low-end smartphone segments and customer inventory restocking,” said Lora Ho, Senior Vice President and Chief Financial Officer of TSMC.

“We expect our business in the second quarter will benefit from continued inventory restocking and recovery of the delayed shipments from the earthquake.”

In fiscal year 2016, the company will spend between $9 and $10 billion on ramping up the 16-nanometer process node, constructing Fab 15 for 12-inch wafers in Nanjing, China, and beginning commercial production of the 10-nanometer FinFET process at this new facility. Samsung and Intel are also expected to start mass production of 10-nanometer products by the end of 2016.

During its Q4 2015 earnings call, company president and co-CEO Mark Liu stated the company is currently preparing and working on a 7-nanometer process node and plans to begin volume production sometime in 2018. Meanwhile, since January 2015, a separate research and development team at TSMC has been laying the groundwork for a 5-nanometer process which the company expects to bring into commercial production sometime in 1H 2020.

So far in Q1 2016, shipments of 16 and 20-nanometer wafers have accounted for around 23 percent of the company’s total wafer revenues.

Courtesy-Fud

At the GDC 2016 show in San Francisco, Razer has announced that the Core will be ready in April and have a price of US $499. As expected, it has been only validated on Razer Blade Stealth and the newly introduced Razer Blade 2016 Edition notebooks but as it uses Thunderbolt 3 interface, it should be compatible with any other notebook, as long as manufacturer wants it.

With dimensions set at 105 x 353 x 220mm, the Razer Core is reasonably portable. It comes with a 500W PSU and features four USB 3.0 ports, Gigabit Ethernet and Thunderbolt 3 port which is used to connect it to a notebook.

As far as graphics cards support is concerned, Razer says that the Core will work with any AMD Radeon graphics card since Radeon 290 series, including the latest R9 Fury, R9 Nano and Radeon 300 series, as well as pretty much all Nvidia Maxwell GPU based graphics cards since Geforce GTX 750/750 Ti, although we are not sure why would you pair up a US $500 priced box with a US $130 priced graphics cards. The maximum TDP for the graphics card is set at 375W, which means that all dual-GPU solutions are out of the picture, so it will go as far as R9 Fury X or the GTX Titan X.

There aren’t many notebooks that feature a Thunderbolt 3 ports and we have heard before that Thunderbolt 3 might have certain issues with latency, which is probably why other manufacturers like MSI and Alienware, went on with their own proprietary connectors. Of course, Razer probably did the math but we will surely keep a closer eye on it when it ships in April. Both AMD and Nvidia are tweaking their drivers and already have support for external graphics, so it probably will not matter which graphics card you pick.

According to Razer, the Razer Core will be available in April and priced at US $499. Razer is already started taking pre-orders for the Razer Core and offers a US $100 discount in case you buy it with one of their notebooks, Razer Blade 2016 or Blade Stealth.

Courtesy-Fud

Meizu is expected to be one of the first companies to use the X25. Last year it was also the first to use MTK 6795T for its Meizu MX5 phone. In that case the “T” suffix stood for Turbo. This phone was 200 MHz faster than the standard Helio X10 “non T” version.

In 2016 is that MediaTek decided to use the new Helio X25 name because of a commercial arrangement. MediaTek didn’t mention any of the partners, but confirmed that the CPU and GPU will be faster. They did not mention specific clock speeds. Below is a diagram of the Helio X20, and we assume that the first “eXtreme performance” cluster will get a frequency boost, as well as the GPU.

The Helio X25 will not have any architectural changes, it is just a faster version of X20, just like MTK 6795T was faster version of MTK 6795. According to the company, the Helio X25 will be available in May.

This three cluster Helio X25 SoC has real potential and should be one of the most advanced mobile solutions when it hits the market.The first leaked scores of the Helio X20 suggest great performance, but the X25 should have even better scores. There should be a dozen design wins with Helio X20/ X25 and most of them are yet to be announced. There should be a few announcements for the Helio X25 soon, but at least we do know that now there will be a even faster version of three cluster processor.

Courtesy-Fud