Seagate Gobbles Up Lacie
Seagate has signed a deal to buy consumer storage vendor Lacie that values the firm at $186m.
Seagate, which recently completed the acquisition of Samsung’s hard disk unit and swiftly cut warranties on most of its drives to just one year, has now announced that it will buy hard drive packager Lacie. Seagate has signed an agreement with Philippe Spruch, Lacie’s chairman and CEO, to purchase his 63.5 percent stake in the company at $7.05 per share in cash, which values the firm at $186m.
According to Seagate the purchase should help the firm grow in Europe and Japan. The firm also announced that Spruch will be employed by Seagate and run its consumer products division.
Steve Luczo, Seagate chairman, CEO and president said, “Lacie has built an exceptional consumer brand by delivering exciting and innovative high end products for many years. This transaction would bring a highly complementary set of capabilities to Seagate, significantly expand our consumer product offerings, add a premium branded direct attached storage line, strengthen our network-attached storage business line and enhance our capabilities in software development.”
Lacie’s fancy portable hard drives are popular among those who like fancy cases wrapped around bog-standard consumer hard disks. Seagate’s purchase of Lacie should see the firm not only become the sole supplier of hard drives in Lacie products but make a renewed push in the consumer portable hard drive market following last year’s floods in Thailand that affected the three big hard drive manufacturers.
Seagate said the deal should be completed by the third quarter of 2012 pending regulatory approval in the US, France and Germany.
.
AMD Officially Launches Trinity Mobile
AMD has finally and officially lifted an NDA veil off its mobile Trinity A-series APU lineup based on the 2nd-gen Bulldozer CPU core, aka Piledriver, and VLIW4 Northern Islands GPU squeezed together on a 32nm SOI die.
Architecture-wise, AMD’s Trinity combines two to four Piledriver x86 cores combined with up to 384 VLIW4 Radeon cores on a 32nm die which ends up as a 246mm2 chip with 1.303B transistors, slightly more than Llano’s 228mm2/1.178B. Since it is made in the same 32nm manufacturing process as Llano, the greatest win for Trinity are actual CPU and GPU performance improvements as well as impressive power consumption improvements when compared to Llano APUs.
Same as the FX-series desktop parts based on the Bulldozer architecture, AMD’s Trinity CPU part has a 2+1 integer/floating point design where you get two integer cores that share a single floating point scheduler. Although it appears to the OS as two cores, each Piledriver module actually has less resources than traditional core design. But with Piledriver, those Bulldozer kinks got ironed out as much as possible, improving IPC (instruction per cycle), reducing leakage, reducing CAC and giving it a slight frequency uplift.
As far as the GPU is concerned, we are looking at quite familiar Northern Islands VLIW4 part, a same one that was behind Cayman Radeon HD 6970 graphics card. Of course, the GPU has been cut down to up to 384 stream processors (organized in 6 SIMDs) with 24 texture units and 8 ROPs. The clocks have also gone down to 497MHz base clock that can “turbo” up to 686MHz.
Dell Intros Ivy Bridge Xeon Servers
Dell has become the first to announce servers using Intel’s latest Ivy Bridge Xeon E3 processors.
Intel launched its single socket Ivy Bridge Xeon E3 processors a month after it wowed everyone with its dual-core Sandy Bridge Xeon E5 processors, and it has taken Dell only another month to announce the first servers to make use of Intel’s latest nearline server chip. Dell’s Poweredge C5220 microserver uses Xeon E3 1200 series processors that have thermal design power (TDP) down to 17W.
Dell is pitching its Poweredge C5220 servers towards high performance computing, cloud deployments and content delivery networks. While Dell calls the Poweredge C5220 a microserver, that really isn’t a reference to its size or density, but rather the fact that it is a single socket server.
Dell offers the Poweredge C5220 with either 17W or 45W TDP Intel processors supporting DDR3-1600 memory. The firm claims close to double the performance over previous generation single socket servers, mainly due to a 50 per cent increase in density.
Trinity Launching On Desktops This Summer
Comments Off on Trinity Launching On Desktops This Summer
AMD is expected to introduce its new mobile Trinity APU in a week or so and now we are hearing some timeframes for desktop parts as well.
According to Digitimes, desktop Trinity parts are coming in August, while Brazos 2.0 chips are expected in June. There is no word on Trinity ULV parts yet and we believe they will be the most interesting of the lot.
Is Moore’s Law Dead?
May 11, 2012 by admin
Filed under Uncategorized
Comments Off on Is Moore’s Law Dead?
Physicist Michio Kaku says that Moore’s law will be dead within about 10 years.
Kaku, professor of theoretical physics at City University of New York told BigThink.com that we are already seeing a slowing down of Moore’s Law. He said that computing power simply cannot maintain this rapid, exponential rise using standard silicon technology.
Kaku said that the latest CPUs from Intel, which use a unique three-dimensional design, do continue roughly doubling processors. But he points out that the new design is nonetheless proof that the Law is winding down.
The two basic problems are heat and leakage and that is why the age of silicon will eventually come to a close.
By continuing to shrink the parts that go into processors, heat becomes concentrated. At a point in the near future, the heat generated will be so intense that the chip will melt. You can literally fry an egg on top of the chip, and the chip itself begins to disintegrate, he said.
AMD Shows Off New Radeon Chips
AMD has now officially updated its HD 7000M lineup of mobile GPUs with HD 7700M, HD 7800M and HD 7900M GPUs that are all based on AMD’s 28nm GCN architecture. The first in line that should show up in notebooks is the flagship HD 7970M GPU.
As noted, the entire lineup is based on AMD’s 28nm GCN architecture, but as always, the naming scheme of the AMD mobile parts has nothing to do with the desktop ones. The HD 7900M, codename Wimbledon, is actually based on 28nm Pitcairn destkop GPU that features 1280 stream processors, 80 texture units, 32 ROPs and up to 2GB of GDDR5 memory paired up with a 256-bit memory interface.
The HD 7800M series, codename Heathrow and the Radeon HD 7700M series, codename Chelsea, are both based on Cape Verde desktop GPU but with a slight twist. While Heathrow, HD 7800M series features fully enabled Cape Verde GPU with 640 stream processors, 40 texture units and 16 ROPs, the Chelsea HD 7700M series is based on a “crippled” Cape Verde core with 512 stream processors and 32 texture units. Both the HD 7800M series and the HD 7700M series will feature up to 2GB of GDDR5 memory paired up with a 128-bit memory interface. Of course, we expect at least two SKUs for both HD 7700M and HD 7800M series.
AMD also decided to ditch the PCI-Express 3.0 support on the HD 7700M series mainly as this one is aimed at lower-performance platforms that are all about power saving, and performance gain was simply too low.
For now, AMD has only shed precise details regarding the HD 7970M GPU that is based on the fully enabled Pitcairn GPU with 1280 stream processors that will end up clocked at 850MHz for the GPU and 4.8GHz for 2GB of GDDR5 memory paired up with a 256-bit memory interface.
As you can notice, the HD 7970M has lower GPU clocks than its HD 7870 desktop counterpart, but AMD also decided to keep the memory at the same level resulting in 153.6GB/s of memory bandwidth. According to AMD slides, HD 7970M should end up to be anywhere between 30 and 60% faster than HD 6990M and anywhere between 16 and 76 percent when compared to Nvidia current high-end GTX 675M GPU.
Is Samsung Pursuing The Server Market?
Comments Off on Is Samsung Pursuing The Server Market?
It is certain that Korean electronics giant Samsung will soon be entering the server chip market.
Reports are coming in that the company has been picking up key server personnel from Intel and AMD. Samsung has been focused on developing ARM chips and stayed clear of the x86 architecture used by Intel and AMD.
But the companies latest hires seem to indicate that might change.
Samsung’s latest recruits include veterans of the chip business like Jim Mergard, Frank Helms, who is a Fusion APU architect, Brad Burgess who designed the Bobcat APU and Patrick Patla (VP of AMD’s server business). Patla was behind the success of the Opteron chip set and has done well using the x86-server system.
AMD’s Trinity To Have Fewer Cores
AMD’s soon to launch A10 5800K is a 100W quad-core Trinity 32nm CPU with 3.8 GHz base clock and 4.2GHz maximal clock possible with AMD turbo core dynamic overclocking technology.
The A10 5800K has 4MB of L2 cache, supports DDR3 1866, dual graphics configurations as well as AMD’s new FM2 socket. The fun part is new HD 7660D GPU that works at 800MHz and comes with 384 shader units. The current APU market leader A8 3870K that works at 3GHz has HD 6550 graphics with 400 cores running at 600MHz.
AMD claims that new Radeon cores from Trinity CPU including A10 5800K are more efficient and this is the main reason why you have fewer cores that can deliver superior performance. The other reason is that with 800MHz core clock they can probably process more data, meaning that HD 7660D of A10 5800K should end up quite a bit faster than the Llano A8 3870K.
All these Radeon cores are a key feature of the Vision Engine that accelerates GPU enabled applications. AMD also tells the world that Trinity is DirectX 11 compatible, supports Direct compute and the new A series of processors, including the A10 5800K all the way to dual-core A4 5300, should not have any issues playing Blu-ray 3D. The GPU part of Trinity supports AMD V, UVD3 as well as Open CL acceleration.
AMD 7990 Specs Unveiled
As we draw close to the official Nvidia GTX 680 Kepler GK104 launch day it is no wonder that we’ll hear more and more about AMD’s upcoming dual-GPU HD 7990 graphics card and Chinese site INPAI has shed some new light on the dual-headed beast. Apparently, the HD 7990 will pack two Tahiti XT chips squeezed together on one PCB.
According to the post at INPAI, the upcoming HD 7990 features two 28nm GCN Tahiti XT chips, same one found on the HD 7970 graphics card. This means that we are looking at a card that will have 2048 stream processors and 3GB of memory per GPU. Appearently, these two Tahiti chips will end up clocked at 850MHz while memory will work at 1250MHz (5GHz effective).
Is Ivy Bridge Better Than Llano?
Ivy Bridge notebook and desktop chips will start to surface in late April. It all starts with quad cores on April 29th and in late May early June it expands to dual cores.
Since Anand already benchmarked Ivy Bridge desktop 3770K, we got quite a nice glimpse of what to expect from Ivy Bridge graphics. Still, our sources are telling us that the final graphics scores will end up significantly faster, once the new launch driver gets ready.
You should expect Llano-class performance from Ivy Bridge we were told. Llano scales from HD 6370 integrated graphics all the way to the HD 6550 DirectX 11 core, and Ivy Bridge scores should come very close to this.