Company co-CEO Mark Liu said that while the fourth quarter could be a bit rough as customers start their inventory adjustments, TSMC’s sales for the quarter will still outperform those for the third quarter.

Talking to Digitimes Lui said that smartphone demand was affected negatively by macroeconomic factors in the first half of 2016. But apparently smartphone chip clients are ordering again in the second half of the year.

TSMC previously estimated its 2016 revenues would grow 5-10 per cent. The foundry expects to meet the high end of the growth guidance, Liu said. In his speech at the CEO Forum of SEMICON Taiwan 2016. Liu claimed that the foundry industry growth is being driven by the markets for smartphones, HPC, automotive and IoT.

Apps like Pokemon G will require more silicon chips used in mobile devices that will be another growth driver in the future, Liu said.

Courtesy-Fud

According to the company the improved management tools address both host (server) managment and virtual client monitoring. Nvidia says that with the new Grid software, admins will be able to get information about the number of virtual graphics instances in use and the number they can potentially create.

They can also see usage information for the stream processors on board each card, the percentage of the card’s frame buffer that’s in use, and the load on each card’s dedicated video encode and decode hardware.

Each guest vGPU instance will tell admins information on encoder and decoder usage, frame buffer occupancy, and the vGPU use. Nvidia adds that it all takes the guess work out of vGPU provisioning and the data it’s exposing about vGPU usage will let system administrators tailor their virtual user profiles better.

All this means that it might stop the admins giving too much processing power to accounts when it is needed for the graphics team. Nvidia thinks those operational improvements will also help lower costs. The August 2016 Grid software update should be available immediately.

Courtesy-Fud

According to the slides published by Computerbase.de, both GPUs are based on AMD’s 4th generation Graphics Core Next (GCN 4.0) GPU architecture, offer 2.8 perf/watt improvement compared to the previous generation, have 4K encode and decode capabilities as well as bring DisplayPort 1.3/1.4 and HDR support.

Powering three different graphics cards, these two GPUs will cover different market segments, so the Polaris 10, codename Ellesmere, will be powering both the Radeon RX 480, meant for affordable VR and 1440p gaming as well as the recently unveiled RX 470, meant to cover the 1080p gaming segment. The Polaris 10 packs 36 Compute Units (CUs) so it should end up with 2304 Stream Processors. Both the RX 480 and RX 470 should be coming with 4GB or 8GB of GDDR5 memory, paired up with a 256-bit memory interface. The Ellesmere GPU offers over 5 TFLOPs of compute performance and should peak at 150W.

The Radeon RX 470 should be based on Ellesmere Pro GPU and will probably end up with both lower clocks as well as less Stream Processors and according to our sources close to the company, should launch with a US $179 price tag, while the RX 480 should launch on 29th of June with a US $199 price tag for a reference 4GB version. Most AIB partners will come up with a custom 8GB graphics cards which should probably launch at US $279+.

The Polaris 11 GPU, codename Baffin, will have 16 CUs and should end up with 1024 Stream Processors. The recently unveiled Radeon RX 460 based on this GPU should come with 4GB of GDDR5 memory paired up with a 128-bit memory interface. The Radeon RX 460 targets casual and MOBA gamers and should provide decent competition to the Geforce GTX 950 as both have a TDP of below 75W and do not need additional PCIe power connectors.

According to earlier leaked benchmarks, AMD’s Polaris architecture packs quite a punch considering both its price and TDP so AMD just might have a chance to get a much needed rebound in the market share.

Courtesy-Fud

The Micron 1100 SSD is a more mainstream oriented SSD that will be based on Marvell’s 88SS1074 controller and Micron’s 384Gb 32-layer TLC NAND. Using a SATA 6Gbps interface and available in M.2 and 2.5-inch form-factors, the Micron 1100 should replace Micron’s mainstream M600 series, based on 16nm MLC NAND.

The Micron 1100 SSD will be available in 256GB, 512GB, 1TB and 2TB capacities. It will offer sequential performance of up to 530MB/s for read and up to 500MB/s for write with random 4K performance of up to 92K for read and up to 83K IOPS for write. With such performance, it is obvious that the Micron 1100 series will target mainstream market and be a budget SSD.

The Micron 2100 is an M.2 PCIe NVMe SSD that is actually Micron’s first client oriented PCIe SSD and also the first PCIe SSD based on 3D NAND. Unfortuantely, Micron did not finalize the precise specifications so we still do not have precise performance numbers but it will be available in capacities reaching 1TB.

The Micron 1100 is expected to hit mass production in July so we should expect some of the first drives by the end of the next month. The Micron 2100 will be coming by the end of summer.

Courtesy-Fud

The new test chip contains ARM’s yet-to-be-announced “Artemis” CPU core which is named after a goddess who will turn you into deer and tear you apart with wild dogs if you ever see her. [The NDA must have been pretty tough on this chip.ed]

In fact things have been ticking along on this project for ages. ARM discloses that tapeout actually took place back in December last year and is expecting silicon to come back from the foundry in the following weeks.

ARM actually implemented a full four-core Artemis cluster on the test chip which should show vendors what is possible for their production designs. The test chip has a current generation Mali GPU implementation with 1 shader core to show vendors what they will get when they use ARM’s POP IP in conjunction with its GPU IP. There is also a range of other IP blocks and I/O interfaces that are used to validation of the new manufacturing process.

TSMC’s 10FF manufacturing process is supposed to increase density with scaling’s of up to 2.1x compared to the previous 16nm manufacturing node. It also brings about 11-12 per cent higher performance at each process’ respective nominal voltage, or a 30 per cent reduction in power.

ARM siad that comparing a current Cortex A72 design on 16FF+ and an Artemis core on 10FF on the new CPU and process can halve the dynamic power consumption. Currently clock frequencies on the new design are still behind the older more mature process and IP, but ARM expects this to improve as it optimizes its POP and the process stabilizes.

Courtesy-Fud

Digitimes’ deep throats claimed TSMC is expected to achieve certification on its 10nm process in the fourth quarter of 2016, and deliver product samples to the customer for validation in the first quarter of 2017.

This means that TSMC could begin small-volume production for Apple’s A11 chips as early as the second quarter of 2017 and building the chips will likely start to generate revenues at TSMC in the third quarter. The A11-series processor will power the iPhone models slated for launch in the second half of 2017.

TSMC is expected to get two-thirds of the overall A11 chip orders from Apple.

The company is officially refusing to comment on Digitimes’ story, but it does fit into what we have already been told about Jobs’ Mob’s plans for next year.

The 2nd generation High Bandwidth Memory (HBM 2.0) for high-end GPUs might happen in very late Q4 2016 but realistically it probably won’t ship until 2017 in any volume.

The first card that we expect supporting this feature might be the Greenland, a card that AMD might end up calling Vega. Even according Radeon Technology Group’s official GPU roadmap, Vega / Greenland now look like a 2017 product, or at very best, late 2016 card. Nvidia might make the HBM 2.0 version of the Titan card, but we don’t expect to see a Geforce GTX based on Pascal GPU and HBM 2.0 coming to the market this year.

We managed to talk to some of the memory manufactures and they told us that HBM 2.0 is very limited in supply, and limited supply makes things expensive.

It seems that GPUs of 2016, including the new AMD Polaris and the new Geforce, will be stuck with GDDR5 and in best case scenario with GDDR5X from Micron. The word on the street is that both Geforce GTX based on Pascal and AMD/RTG’s Polaris 10 / Ellesmere and Polaris 11 / Baffin might launch at Computex during last days of May or early June 2016.

Courtesy-Fud

For TSMC, Q1 2016 was marked by a reduction of demand for high-end smartphones, while smartphone demand in China and emerging markets had upward momentum. Beginning Q2 2016 and onward, the company expect to get back onto a growth trajectory and is projected to hit a 5 to 10 percent growth rate in 2016.

“Our 10-nanometer technology development is on track,” said company president and co-CEO Mark Liu during the company’s Q4 2015 earnings call. “We are currently in intensive yield learning mode in our technology development. Our 256-megabit SRAM is yielding well. We expect to complete process and product qualification and begin customer product tape-outs this quarter.”

“Our 7-nanometer technology development progress is on schedule as well. TSMC’s 7 nanometer technology development leverage our 10-nanometer development very effectively. At the same time, TSMC’s 7-nanometer offers a substantial density improvement, performance improvement and power reduction from 10-nanometer.

These two technologies, 10-nanometer and 7-nanometer, will cover a very wide range of applications, including application processors for smartphone, high-end networking, advanced graphics, field-programmable gate arrays, game consoles, wearables and other consumer products.”

In Q1 2016, TSMC reached a gross margin of 44.9 percent, an operating margin of 34.6 percent and a net profit margin of 31.8 percent respectively. Going forward into Q2 2016, the company is expecting revenue between ~$6.65 billion and ~$6.74 billion USD, gross margins between 49 and 51 percent, and operating profit margins between 38.5 and 40.5 percent, respectively.

Chips used for communications and industrial uses represented over 80 percent of TSMC’s revenue in FY 2015. The company was also able to improve its margins by increasing 16-nanometer production, and like many other semiconductor companies, is preparing for an expected upswing sometime in 2017.

In February, a 6.4-magnitude earthquake struck southern Taiwan where TSMC’s 12-inch Fab 14 is located, a current site of 16-nanometer production. The company expected to have a manufacturing impact above 1 percent in the region with a slight reduction in wafer shipments for the quarter.

“Although the February 6 earthquake caused some delay in wafer shipments in the first quarter, we saw business upside resulting from demand increases in mid- and low-end smartphone segments and customer inventory restocking,” said Lora Ho, Senior Vice President and Chief Financial Officer of TSMC.

“We expect our business in the second quarter will benefit from continued inventory restocking and recovery of the delayed shipments from the earthquake.”

In fiscal year 2016, the company will spend between $9 and $10 billion on ramping up the 16-nanometer process node, constructing Fab 15 for 12-inch wafers in Nanjing, China, and beginning commercial production of the 10-nanometer FinFET process at this new facility. Samsung and Intel are also expected to start mass production of 10-nanometer products by the end of 2016.

During its Q4 2015 earnings call, company president and co-CEO Mark Liu stated the company is currently preparing and working on a 7-nanometer process node and plans to begin volume production sometime in 2018. Meanwhile, since January 2015, a separate research and development team at TSMC has been laying the groundwork for a 5-nanometer process which the company expects to bring into commercial production sometime in 1H 2020.

So far in Q1 2016, shipments of 16 and 20-nanometer wafers have accounted for around 23 percent of the company’s total wafer revenues.

Courtesy-Fud

The Samsung PM971 built using the company’s Photon controller and runs MLC 3D V-NAND (contrary to the picture above, PC Watch claims it is actually 3-bits per cell). The drive will be available in 128GB, 256GB and 512GB storage capacities and will feature sequential reads up to 1,500MB/s, sequential writes up to 600MB/s, random reads up to 190,000 IOPS and random writes up to 150,000 IOPS.In general, SSDs with BGA packaging are considerably smaller than those using the M.2 form factor, and Intel has claimed that using a PCI-E BGA SSD could allow an increase in battery size by around 10-percent compared to using an M.2 2260 SSD (with GPIO using 1.8v power rail instead of 3.3v), lower thermals than M.2 (from BGA ball conduction to motherboard instead of through M.2 mounting screws), and a vertical height savings of 0.5mm to 1.5mm in notebook devices.

The nice thing about BGA SSDs is that they are “complete” storage solutions and integrate NAND flash memory, the NAND controller and DRAM all into a single package. Currently, there are several BGA M.2 form factors being proposed that will make single-chip SSDs a reality sooner than later as the result of a collaboration between HP, Intel, Lenovo, Micron, SanDisk, Seagate and Toshiba. The four BGA SSD packages proposed are Type 1620, Type 2024, Type 2228 and Type 2828, ranging anywhere between 16 x 20 millimeters and 28 x 28 millimeters with up to 2-millimeter vertical height. It is currently unknown whether the Samsung PM971 adopts any of these proposed BGA M.2 standards.

Based on the demonstration at the 2016 Samsung SSD Forum in Japan, the PM971 offers decent performance thanks to a PCI-E 3.0 x4 interface and the company’s new Photon controller. According to the PC Watch website, the drive is physically smaller than an SD card and Samsung expects device manufacturers and OEMs to begin adoption in the second half of 2016 or the first half of 2017.

Courtesy-Fud

At the GDC 2016 show in San Francisco, Razer has announced that the Core will be ready in April and have a price of US $499. As expected, it has been only validated on Razer Blade Stealth and the newly introduced Razer Blade 2016 Edition notebooks but as it uses Thunderbolt 3 interface, it should be compatible with any other notebook, as long as manufacturer wants it.

With dimensions set at 105 x 353 x 220mm, the Razer Core is reasonably portable. It comes with a 500W PSU and features four USB 3.0 ports, Gigabit Ethernet and Thunderbolt 3 port which is used to connect it to a notebook.

As far as graphics cards support is concerned, Razer says that the Core will work with any AMD Radeon graphics card since Radeon 290 series, including the latest R9 Fury, R9 Nano and Radeon 300 series, as well as pretty much all Nvidia Maxwell GPU based graphics cards since Geforce GTX 750/750 Ti, although we are not sure why would you pair up a US $500 priced box with a US $130 priced graphics cards. The maximum TDP for the graphics card is set at 375W, which means that all dual-GPU solutions are out of the picture, so it will go as far as R9 Fury X or the GTX Titan X.

There aren’t many notebooks that feature a Thunderbolt 3 ports and we have heard before that Thunderbolt 3 might have certain issues with latency, which is probably why other manufacturers like MSI and Alienware, went on with their own proprietary connectors. Of course, Razer probably did the math but we will surely keep a closer eye on it when it ships in April. Both AMD and Nvidia are tweaking their drivers and already have support for external graphics, so it probably will not matter which graphics card you pick.

According to Razer, the Razer Core will be available in April and priced at US $499. Razer is already started taking pre-orders for the Razer Core and offers a US $100 discount in case you buy it with one of their notebooks, Razer Blade 2016 or Blade Stealth.

Courtesy-Fud